This article follows two earlier blog posts about Device Tree overlays: Using Device Tree Overlays, example on BeagleBone boards Device Tree: Supporting Similar Boards – The BeagleBone Example Introduction As explained in the first two blog posts, the BeagleBone boards are supported by a wide number of extension boards, called capes. When such a cape is plugged in, the description of the devices connected to the board should be updated accordingly. As the available hardware is described by a Device Tree, the added devices on the cape should be described using a Device Tree Overlay, as described in the first … Continue reading Using the U-Boot Extension Board Manager – BeagleBone Boards Example