Beagle Board -

ShieldI/O Cape

Use Arduino shields with your BeagleBone or BeagleBone Black

ShieldI/O Cape provides the ability to mount (almost) every Arduino Shield on the BeagleBone Black, no matter if it’s using 3.3V or 5V logic levels. Changing from 3.3V to 5V is done by software. 

It can also be ordered with an onboard 16 pin I/O expander which is accessible over the I2C bus.

See for more information.


Tags: cape;bbblack;bbone;
Projected created on: Fri Aug 22 2014 14:47:34 GMT-0000 (UTC)
Submitted by:
Last updated on: Fri Aug 22 2014 14:47:34 GMT-0000 (UTC)